ESP32 DevKit project with 9 V battery and INA219 current sensor
Built and tested in Zen Circuit Lab: it runs in the simulator. Parts: 5 × Resistor, 4 × LED, 9 V battery, Breadboard, INA219 current sensor, Step-down converter, DHT11 temperature & humidity module, USB charger / port and more. Open it, change a part and watch the readings.
What is on the bench
17 parts, 33 wires, with a sketch (the program runs in the lab). Boards: ESP32 DevKit.
| Resistor | 5 |
|---|---|
| LED | 4 |
| 9 V battery | 1 |
| Breadboard | 1 |
| INA219 current sensor | 1 |
| Step-down converter | 1 |
| DHT11 temperature & humidity module | 1 |
| USB charger / port | 1 |
| ESP32 DevKit | 1 |
Built for real
Nobody has posted a real build of this one yet. Be the first!
Comments
⚠️ Mains wiring, big batteries and solar arrays can hurt you. Comments are other makers’ experience, not checked by the lab: check advice against the datasheets and your local electrical code, and report advice that looks dangerous. Be kind: community rules.
No comments yet.
Put it on your page
The project runs live inside the frame: readers can press buttons, turn knobs and read the meters.
<iframe src="https://zencircuitlab.com/embed/duts52q5id" width="100%" height="560" style="border:1px solid #2f363a;border-radius:10px" loading="lazy" title="ESP32 DevKit project with 9 V battery and INA219 current sensor on Zen Circuit Lab"></iframe>
Link
https://zencircuitlab.com/p/duts52q5id
Published by its author under the lab's community terms: it may be opened, copied and changed by anyone. Simulation results are for learning; check a real build against the parts' datasheets.