Home › Projects › ESP32 DevKit project with Step-down converter and 9 V battery

ESP32 DevKit project with Step-down converter and 9 V battery

by Ali🌱 Founding Maker · published today · 1 opened in the lab · 5 page views

ESP32 DevKit project with Step-down converter and 9 V battery: the circuit on the lab bench

Open in the lab ▸Remix it ▸

Built and tested in Zen Circuit Lab: it runs in the simulator. Parts: 5 × Resistor, 4 × LED, USB charger / port, Breadboard, Step-down converter, 9 V battery, Relay module, INA219 current sensor and more. Open it, change a part and watch the readings.

What is on the bench

19 parts, 41 wires, with a sketch (the program runs in the lab). Boards: ESP32 DevKit.

Resistor5
LED4
USB charger / port1
Breadboard1
Step-down converter1
9 V battery1
Relay module1
INA219 current sensor1
ESP32 DevKit1
DHT11 temperature & humidity module1

Built for real

Nobody has posted a real build of this one yet. Be the first!

Sign in to say you built it

Comments

⚠️ Mains wiring, big batteries and solar arrays can hurt you. Comments are other makers’ experience, not checked by the lab: check advice against the datasheets and your local electrical code, and report advice that looks dangerous. Be kind: community rules.

Sign in to comment

No comments yet.

Put it on your page

The project runs live inside the frame: readers can press buttons, turn knobs and read the meters.

<iframe src="https://zencircuitlab.com/embed/ebbprcd4mg" width="100%" height="560" style="border:1px solid #2f363a;border-radius:10px" loading="lazy" title="ESP32 DevKit project with Step-down converter and 9 V battery on Zen Circuit Lab"></iframe>

Link

https://zencircuitlab.com/p/ebbprcd4mg

Published by its author under the lab's community terms: it may be opened, copied and changed by anyone. Simulation results are for learning; check a real build against the parts' datasheets.