Small Offgrid Solar Setup with AC and DC Load
Built and tested in Zen Circuit Lab: it runs in the simulator. It passes the safety check (17 checks). Parts: 4 × DC breaker, 2 × AC breaker, 2 × 220 V bulb, 2 × Surge protector (SPD), Solar charge controller, Power inverter, 220 V desk fan, Ground symbol and more. Open it, change a part and watch the readings.
What is on the bench
18 parts, 31 wires.
| DC breaker | 4 |
|---|---|
| AC breaker | 2 |
| 220 V bulb | 2 |
| Surge protector (SPD) | 2 |
| Solar charge controller | 1 |
| Power inverter | 1 |
| 220 V desk fan | 1 |
| Ground symbol | 1 |
| Wall outlet | 1 |
| 12 V DC LED bulb | 1 |
| Solar panel | 1 |
| LiFePO4 battery | 1 |
Built for real
Nobody has posted a real build of this one yet. Be the first!
Comments
⚠️ Mains wiring, big batteries and solar arrays can hurt you. Comments are other makers’ experience, not checked by the lab: check advice against the datasheets and your local electrical code, and report advice that looks dangerous. Be kind: community rules.
No comments yet.
Put it on your page
The project runs live inside the frame: readers can press buttons, turn knobs and read the meters.
<iframe src="https://zencircuitlab.com/embed/r9mk6y4qhm" width="100%" height="560" style="border:1px solid #2f363a;border-radius:10px" loading="lazy" title="Small Offgrid Solar Setup with AC and DC Load on Zen Circuit Lab"></iframe>
Link
https://zencircuitlab.com/p/r9mk6y4qhm
Published by its author under the lab's community terms: it may be opened, copied and changed by anyone. Simulation results are for learning; check a real build against the parts' datasheets.