Home › Projects › Rain alarm: two bare wires, one transistor and a buzzer (my version)

Rain alarm: two bare wires, one transistor and a buzzer (my version)

published 3 days ago · 1 opened in the lab · 5 page views · remixed from Rain alarm: two bare wires, one transistor and a buzzer by Zen Circuit Lab

Rain alarm: two bare wires, one transistor and a buzzer (my version): the circuit on the lab bench

Open in the lab ▸Remix it ▸

Built and tested in Zen Circuit Lab: it runs in the simulator. Parts: 4 × Resistor, 9 V battery, NPN transistor, Active buzzer, LED. Open it, change a part and watch the readings.

What is on the bench

15 parts, 18 wires.

Resistor4
9 V battery1
NPN transistor1
Active buzzer1
LED1

Built for real

Nobody has posted a real build of this one yet. Be the first!

Sign in to say you built it

Comments

⚠️ Mains wiring, big batteries and solar arrays can hurt you. Comments are other makers’ experience, not checked by the lab: check advice against the datasheets and your local electrical code, and report advice that looks dangerous. Be kind: community rules.

Sign in to comment

No comments yet.

Put it on your page

The project runs live inside the frame: readers can press buttons, turn knobs and read the meters.

<iframe src="https://zencircuitlab.com/embed/v6z8czfrsm" width="100%" height="560" style="border:1px solid #2f363a;border-radius:10px" loading="lazy" title="Rain alarm: two bare wires, one transistor and a buzzer (my version) on Zen Circuit Lab"></iframe>

Link

https://zencircuitlab.com/p/v6z8czfrsm

Published by its author under the lab's community terms: it may be opened, copied and changed by anyone. Simulation results are for learning; check a real build against the parts' datasheets.