Solar Light with USB-C Charging Option
Built and tested in Zen Circuit Lab: it runs in the simulator. It passes the safety check (0 checks). Parts: 2 × DC barrel jack, 2 × LiFePO4 cell, Project enclosure, 12 V DC LED bulb, Solar charge board (MPPT), Fuse, XL6009 buck-boost module, USB-C 2S charger board and more. Open it, change a part and watch the readings.
What is on the bench
16 parts, 24 wires.
| DC barrel jack | 2 |
|---|---|
| LiFePO4 cell | 2 |
| Project enclosure | 1 |
| 12 V DC LED bulb | 1 |
| Solar charge board (MPPT) | 1 |
| Fuse | 1 |
| XL6009 buck-boost module | 1 |
| USB-C 2S charger board | 1 |
| Smartphone | 1 |
| USB step-down module (ZCL-B53) | 1 |
| 2S LiFePO4 BMS | 1 |
| USB-C PD charger | 1 |
| Solar panel | 1 |
| Toggle switch | 1 |
Built for real
Nobody has posted a real build of this one yet. Be the first!
Comments
⚠️ Mains wiring, big batteries and solar arrays can hurt you. Comments are other makers’ experience, not checked by the lab: check advice against the datasheets and your local electrical code, and report advice that looks dangerous. Be kind: community rules.
No comments yet.
Put it on your page
The project runs live inside the frame: readers can press buttons, turn knobs and read the meters.
<iframe src="https://zencircuitlab.com/embed/vvmw5jwey6" width="100%" height="560" style="border:1px solid #2f363a;border-radius:10px" loading="lazy" title="Solar Light with USB-C Charging Option on Zen Circuit Lab"></iframe>
Link
https://zencircuitlab.com/p/vvmw5jwey6
Published by its author under the lab's community terms: it may be opened, copied and changed by anyone. Simulation results are for learning; check a real build against the parts' datasheets.